|Type||Hacksaw Metal Cutting Machine|
Hacksaw Metal Cutting Machine engineered by Bravo Engineering Company is widely applauded because of its excellent performance and durability. The metal cutting hacksaw machine offered by our company is fabricated from latest technology for increasing its efficiency and run the machine with free load. All the parts of Hydraulic Metal Cutting Hacksaw Machine are interchangeable and its entire bore is closely reamed. The double ball bearing of this machine is fitted with disk arm. Its connection with the disk and the main crank shaft runs with heavy duty taper roller bearings. Today, we are acknowledged as one of the leading Hydraulic Metal Cutting Hacksaw Machine Manufacturers in India.
The Bed : Bed is of heavy dimension provided with guide way for the vice, to clamp the work pice. One jaw of the vice is fixed while the other is adjusted according to the material diameter.
Saw Frame : Frame is of rigid constructions and runs in prismatic guide insuring a square and parallel cut. The cut take place on draw stroke, and the blade is hydraulically lifted out of contact with forward stroke to prevent wear of the blade, and can cut all types of metel which are mechineable of all Strength.
Feed : Two levers are provided at the dash pot. The small lever regulates the rate of feed, while the other big one enables the slide to start cutting or to be raised the slide automatically, on completion of the cutting cycle and motor switched off automatically.
Speed : A two speed drive mechanism are incorporated for the selection of the most suitable speed for the material being cut. Cooling the machine comes with a very reliable and efficient centrifugalpump, for quick-cooling the Blade. It comes with connection pipes from water tank to stay put on the work pice. The pump is driven by an intermidiate drive.
Standard Accessories : All machines are supplied with centrifugal water pump, Motor-pully, Motor-plates, but without 'V' belts and Electricals.
Extra Accessories : Angular vice simple, Angular vice with Graduation. Electric motor and Starter, '20000 KGS.' belts, Blades. A direct on line push button starter can be in corporated which sets into motor an adjustable trip mechanism which stops the machine as soon as the blade is clear from work. The non-productive time is reduced to minimum.
Note : Dimensions, Design, Weight, & Specifications Can Be Change as Market Demands or Further Improvement of Machine Without Notice.
|Capacity of round||178||7"||200||8"||250||10"||300||16"|
|Capacity of square||127||5"||150||6"||190||7½"||230||12"|
|Capacity of 45 cut||65||2½"||90||3½"||127||5"||178||9"|
|Stroke per minute||90-115||90-115||80-110||60 to 75|
|Size of blade||300-350||350-400||14/16||400-450||16/18||550-600||22/24|
|Motor Rqd. 1440 rpm||1 HP||12/14/14||1 HP||2 HP||3 HP|
|Approx weight||400 Kg||450 Kg||550 Kg||800 Kg|
Note : Dimensions, Designs, Rates & Specifications Can Be Changed as Market Demands or Further Improvement of Machine Without Notice.